Features (Left Column)
TEN total rod holders. Six rod holders (three on each side) welded directly to the top railing and bottom wagon deck for added strength and durability. Rod holders welded on an angle to eliminate risk of breaking rods when hauling under overhead archways and gates. Four additional rod holders (two in the front and two in the rear) are also included and bolted to the 1.5″ x .75″ perimeter railing. Can be used for additional rods, umbrellas, cutting board accessories, etc.
Rod holders are 9.25″ tall and made from 2″ round aluminum tube.
Overall outside maximum width is less than 28″ allowing the wagon to glide easily through all standard entryways, doors and gates.
Solid aluminum deck with corner drain holes. Deck size is 20″ x 36″ with a 2″ perimeter lip. Maximum interior bed dimensions are 18.5″ x 34.5″.
Features (Right Column)
The bottom of the wagon deck stands 15″ from the ground.
Four-11.8″ x 7″ low PSI balloon beach tires allow the wagon to glide easily over soft sand and dirt. Solid hubs with no bearings-no worries of sand binding in any bearings.
Solid .75″ round aluminum axles.
Rust-free aluminum fabrication with stainless steel hardware. No maintenance required!
Weighs only 55 lbs. and hauls up to 350 lbs.
Ships FREE via UPS or Fed Ex Ground.
#Surf fishing & beach wagon.
Minimal assembly required.
MADE IN THE USA!!!
Product Specifications (Right Column)
Built-in rod holders